Category: Side Projects

433MHZ More Things for Smart Things

Finally – off the breadboard and into a working environment. It’s currently working for 433mhz sensors, I will possibly be adding more frequencies later. For now I will continue refining the code to release it on github.

 

Day 1:

A few issues. I accidentally flipped the polarities on the siren. I will eventually implement a 12v regulator to up the voltage for the siren for the full 120db power.

 

Day 2:

My cat set off one of the motion sensors at 6AM, activating the siren. I need to adjust the sensitivity or get pet-friendly motion sensors.

Complete Smart Home Setup

 

I wanted to talk about my smart home setup from the ground up. I have many articles describing my setup in pieces but not everyone gets an entire overview of everything I have setup here. I don’t have a mansion or anything fancy like built in sprinkler/irrigation, so this will be more catered to your average city home.

 

The Assistant:

Google Home and/or Mini manage my random routines that aren’t part of a automation rule. Going to the basement to do laundry, or going to sleep at random times. I can just send a command and google home will handle it. Link your SmartThings account and Google Home together for best results. Give all your devices aliases to make it easier to command via Google. I want one located in every central room of the house, Kitchen, Living room, Master Bedroom.

Control Center:

What controls my entire setup and why I chose this hub vs others. My only hub is a Samsung SmartThings hub. This manages just about everything in my home minus the security cameras. I did heavy research on many hubs including Wink, IOT (hub-less), and Phillips hue. Why SmartThings?

Continue reading . . .

SmartThings zigbee vs Dome light cover

For Christmas my mother got a full smart home kit. Samsung SmartThings, sengled bulbs, google home. After pluging everything in the hub was having issues. Finding all bulbs in dome covers. I removed the glass from the dome cover and tried again with no luck. Afterwards I removed the bulb from the socket and put it in a lamp. Detected and added to smartthings fine in the lamp. Readded it to the dome cover and it works now!! Seems all I had to do is add it to the network beforehand so that it joined the zigbee mesh network. Has anyome faced similar issues?

SmartThings + Vision Micro Switch [Update]

How to get a cheap smart home that actually works. Vision Micro switches lets you use the old fashion switch and also continue to use your old bulbs. Instead of paying $10-30 per smart bulb, you pay around $25 for a single or $30 for a 2 relay switch. 2 relay switches help you save a ton more money, you can use one for 2 gang boxes saving you 2x more money ($15/switch). If you think about it, most ceiling lights have 2-3 bulbs, Why buy so many bulbs when you can buy a single switch.


Continue reading . . .