Cant wait to show you what we have in store, new generators coming soon!
We received our new print bed from eBay/China. Not a Lokbuild but at least its cheaper. First thing I noticed is that this sheet is thicker than a Lokbuild, 0.6mm thick instead of 0.5. When I followed the steps on calibrating I clicked
6 8 times to ensure proper spacing instead of the original 4.
1. Launch AutoMaker software and navigate to Calibration button
2. Follow instructions until asked to insert paper between nozzles and build plate
3. Follow instructions and raise nozzles to point at which paper moves freely between nozzles and build plate
4. Set height
4 6 8 clicks higher than this point (i.e. 0.4 mm)
5. Proceed as normal
A friend at work asked if I could help solve his issues with his water intake from the well. At first I was like um why? Living in the city I did not know anything about how country side water systems worked. Water pumped from a well has a chance that it may contain too much sulfur making the water smell. He wanted to pull rain water into a tank and use it as primary with the well water as a failsafe.
I am thinking about using a basic ESP8266 along with a couple of water pressure sensors and relays triggering the water pumps he already has. The code should be very simple to write and I already have most of the hardware here minus the sensor.
I’m not really sure why it started working all of a sudden. I’m glad I did not buy a Hue hub. I had a test bulb plugged in as a normal bulb when it randomly showed up to my SmartThings hub. This happened after adding Sengled classic bulbs to my system and a SmartThings hub update. I think maybe it had to do with Zigbee adding cross compatibility between ZLL and ZHA protocols. Talk about perfect timing though.
Going to be creating a receiver to translate 433mhz sensors to smart things, Most likely going to be using a esp8266 to make it easier to configure. I still have to figure out how to identify the smart things hub withouth manually entering in its ip, maybe upnp?
I also bought a CC2530 chip for zigbee testing, Not sure what im going to do with that yet.
Edit: I think I may have made a mistake buying zigbee chips. So turns out zwave may have longer battery life compared to zigbee… shoulda researched more